Ras-80 Hitachi Heat Pump (Installed)

Ras-80 Hitachi Heat Pump (Installed)

Price includes back to bak installation.


Product Summary:


The Hitachi Ras-80 is the largest High Wall Heat Pump in the Hitachi range; it is capable of heating an NZ open plan living.



The power output of the Hitachi Ras-80:

  • Heating 1.5-9.7kW
  • Cooling 1.5-8.5kW


Recommended room size: Based on a moderate, well-insulated NZ home with a ceiling height of 2.7m, the Hitachi Ras-35 will heat a room of: 


  • 55-70m2
  • 50-60m2 in cold climates (Invercargill).


Features

  • Nano Titanium Air Purifying Filter
  • Nano Titanium Pre-Filter - Stainless 
  • Green Anti-Corrosion Fin (O/U Coil)
  • Indoor Fan – Anti-Bacterial Coating
  • Multi-Directional Air Flow
  • PAM Control
  • All DC Inverter Control Indoor/Outdoor

Write a review

Note: HTML is not translated!
    Bad           Good

Standard Back to Back Installation

 

Note if your installation falls outside the standard installation you will need to purchase extra products and services. Once you buy your Hitachi Heat Pump, your contractor will give you a call to confirm your installation price before the job commences.

 

Standard installation summary

  • Supply and install all Gas Pipework up to 3m ground level and 5m level 1, (additional pipe $57 per m ) 
  • Interconnect Cables and Gravity fed drain
  • Wired to power with electrical Certificate of compliance.
  • Once commissioned we will demonstrate how to use your Heat Pump.
  • Fill in your warranty form 

 

Labour Includes

Installation of the indoor unit and outdoor unit opposite to each other (Back to Back). Our installer will require clear access internally and a clear flat area externally. Standard home construction brick veneer, timber frame with a ceiling cavity. Extras labour charges will apply to drill through double brick construction, concrete panel type or limited ceiling space (for electrical circuit back to the switchboard

 

Level G and one installation only on private premises. Please note, we do not deal with your Body Corp. Should you need their permission for installation, we need a copy of their agreement in writing before installation 

 

Material Included

  • Insulated R410a Gas Pipe (copper), as per pricing structure above - for low and high set homes up to 5M
  • Interconnecting cables, from internal Heat Pump head to external compressor
  • Gravity fed Drain hose, constant Flexi drain.
  • UV resistant trunking Duct, 1 x Duct and 1 x Wall Caps, in cream plastic. 90mm sized ( 100mm hi-flow extra )
  • Electrical Certificate of Compliance
  • 2 x 450mm x 450mm concrete pavers for the outdoor unit
  • All fixings
  • Testing, commissioning, and handover
  • Your system will be entered into our database and once a year you will be contacted for a service

 

Not Included 

  • Supply of Heat Pump not included.
  • Decommissioning and removal of existing Heat Pump - charges apply –consult with your installer for this
  • Installation of Heat Pumps in locations other than specified herein-charges will apply
  • Installation of the indoor unit on an internal wall,  Extra charges will apply for a condensate lift pump and extra piping
  • Additional travel charges may apply.

If your installation falls outside these areas, you will need to E-mail us to confirm. 

 

 

Auckland

 

Christchurch

 

Dunedin

 

Hamilton

 

Invercargill

 

Napier

 

New Plymouth

 

Otago

 

Palmerston North

 

Rotorua

 

Timaru Oamaru Ashburton

 

Wellington

Capacity 

 

Cooling Capacity (kW) 

8.0

Cooling Range (kW) 

1.5 ~ 8.5 

Sensible Cooling (kW) 

6.15

Heating Capacity (kW) 

9.0

Heating Range (kW) 

1.5 ~ 9.7 

Dehumidifying Capacity (l/h) 

4.8

Efficiency 

 

Power Input kW (Cooling) 

2.45

Power Input kW (Heating) 

2.75

EER / AEER (Cooling)

3.27 / 3.22 

COP / ACOP (Heating) 

3.27 / 3.23 

Star Rating Cool / Heat

 

ENERGY STAR® 

Yes

Air flow 

 

Fan Speeds

4

Air Flow (l/s) Hi / Med / Low / UltraLow (Sleep) 

350 / 242 /225/203 

Compressor Type 

twin Rotary 

Dimensions & weights

Dimensions IU (H x W x D mm) 

333/1150/245 

Weight IU (kg)

16

Dimensions OU (H x W x D mm) 

800/850/298 

Weight OU (kg) 

52

Noise levels

 

Sound Pressure Level IU dB(A) (Hi / Med / Low / Sleep)

49/45/40/36 

Sound Pressure Level OU (dB) Cool / Heat

55/55 

Working range

 

Outdoor Operating Temp. (Cooling) °C db

46 to -10 

Outdoor Operating Temp. (Heating) °C wb

21 to -15 

Features

 

Nano Titanium Air Purifying Filter

Yes 

Nano Titanium Pre-Filter - Stainless 

Yes 

Anti Corrosion Fin (O/U Coil)

Green

Indoor Fan – Anti-Bacterial Coating

Yes 

Multi-Directional Air Flow

Yes 

PAM Control

Yes 

All DC Inverter Control Indoor/Outdoor 

Yes 

Weekly Timer SPX-WKT1

Optional

Weekly Timer Distributor SPX-DST1 

Optional

  • Views: 4632
  • Product Code: RAS-80YHA
  • Availability: In Stock
  • 3,099
  • Ex Tax: 2,695

Tags: Heat Pump, Hitachi, High wall, Ras

Price includes back to back installation.Product Summary:The Hitachi Ras-50 is our second most popul..
2,399
Ex Tax: 2,086
Price includes back to back installation.Product Summary:The Hitachi Ras-25 is rated at 3.2 kW heati..
1,999
Ex Tax: 1,738
Price includes back to back installation.Product Summary:Our most popular Heat Pump, the Hitachi Ras..
2,099
Ex Tax: 1,825
Price includes back to back installationProduct Summary:The Hitachi Ras-60 is rated at 7kW heating a..
2,599
Ex Tax: 2,260
Price includes back to back installationProduct Summary:The Hitachi Ras-70 is the second largest Hig..
2,799
Ex Tax: 2,434
Price includes back to bak installation.Product Summary:The Hitachi Ras-80 is the largest High Wall ..
3,099
Ex Tax: 2,695
Loading...